NORMAFIX® Retaining Pipe Clips


The DIN 3016 standard NORMAFIX® pipe retaining clips are suitable for securing pipes, cables harnesses, cable protection pipes, hoses and cables. They are used in almost all sectors of industry, e.g. in the automotive industry, mechanical and application engineering, hydraulics and pneumatics, measurement and control engineering and the chemical, shipbuilding, electrical and food processing industries.

NORMAFIX® pipe retaining clips are manufactured from zinc plated mild steel or stainless steel and are available in 3 standard types:

TYPE 0 : Pipe Retaining Clamp round shape (to order only)

TYPE 1 : Pipe Retaining Clamp loop shape (standard range with rubber)

TYPE 2 : Pipe Retaining Clamp open shape (to order only)

The form-fitting and adaptable band is reinforced at the ends. Where there is a high mechanical load, for example with pressurized lines, this design feature prevents any tearing or loosening in the clamping area.

All three types are available with rubber sleeve (RSGU) in Polychloroprene, or without (RS). The rubber sleeve provides protection against vibration and water penetration.

No 1Reinforced band ends = preventing the clip from tearing or loosening in cases where there is a high mechanical load.

No 2Form fitting and adjustable band = ease of assembly = safe attachment.

No 3Rubber profile = vibration damping & protection, sound insulation and tight fit on object.

  • Available in 2 material grades (W1 & W5 - W3 & W4 on request)
  • Sound insulation = clip fits tight on object
  • The clips are furnished without screws and nuts
  • With anti-vibration rubber sleeve
  • Available with 6, 8 & 10 mm mounting holes.

Available in 2 material grades:

  • W1: Band: Alu Zinc - Screw & Housing: Mild Steel Zinc Plated Clear Chromate.
  • W5: Band, Screw & Housing: High Grade Stainless Steel throughout (1.4401/AISI 316)
  • Rubber Sleeve: EPDM
Material Properties EPDM
Tensile Strength [N/mm²] 7
Elongation at break [%] 350
Shore hardness A 55 ± 5
Temperature [°C] -40 to +120
Resistance against:
Weather & Ozone very good
Ageing & UV very good
Fuel not resistant
Oils & Greases not resistant
Alcohols good
Acids good
Alkalis good



NORMAFIX® RS/RSGU Pipe Retaining Clip 

Provides the perfect clampening support for hoses, cables, pipes, etc.

  • Band widths: 12mm, 15mm, 16mm & 20mm
  • Sizes available: 4mm - 76mm
  • Available in packs of 10 or in cartons of 100
  • Material grade: W1: Mild Steel Zinc Plated
  • Sleeve: EPDM


NORMAFIX® RLGU Pipe Retaining Clip

Economy version suitable for use in applications submitted to only slight mechanical loads.

  • Band width: 12mm
  • Sizes available: 6mm - 45mm
  • Available in packs of 100
  • Available with a 6mm mounting hole
  • Material grade: W1: Mild Steel Zinc Plated
  • Sleeve: EPDM


NORMAFIX® Heavy Duty 

For the demanding applications, where a high strength clamp is required (e.g. mining and earth moving equipment). The clip has a full vinyl coating to protect the surface of the clamped item.

  • Band width: 19mm and 25mm (19mm with 10mm mount hole, 25mm with 13mm mount hole)
  • Sizes available: 10mm - 73mm
  • Material grade: W1 - Galvanised Steel

Download PDF


Copyright © 2012 Norma Pacific Pty Ltd Terms & Conditions References and Conversions Disclaimer